Allied Telesis AT-8100 Series - Manual (Page 1250)

Chapter 78: LLDP and LLDP-MED
1250
This series of commands adds the entry to port 5 and configures the port
to include the TLV in its advertisements:
awplus# configure terminal Enter the Global Configuration
mode.
awplus(config)# interface port1.0.5 Enter the Port Interface mode for
port 5.
awplus(config-if)# lldp transmit receive Configure the port to send and
receive LLDP advertisements.
awplus(config-if)# lldp location elin-location-id
3 Use the LLDP LOCATION
command to add the ELIN location
entry, ID number 3, to the port.
awplus(config-if)# lldp med-tlv-select location Use the LLDP MED-TLV-SELECT
command to configure the port to
send the location entry in its
advertisements.
awplus(config-if)# end Return to the Privileged Exec
mode.
awplus# show location elin-location interface
port1.0.5 Use the SHOW LOCATION
command to confirm the
configuration.
awplus# show lldp interface port1.0.5 Use the SHOW LLDP
INTERFACE command to confirm
the port is configured to send the
location entry.