Allied Telesis AT-8100 Series - Manual (Page 712)

Chapter 46: Event Log Commands
712
SHOW LOG TAIL
Syntax
show log tail [ number ]
Parameter
number
Specifies the number of event messages to display. The range is
10 to 250 messages. The default is 10 messages.
Mode
Privileged Exec mode
Description
Use this command to display the most recent event messages in the
buffered event log. The NUMBER parameter is used to specify the
number of messages to display. The messages are displayed from oldest
to newest. For an example and description of the log, refer to Figure 134
on page 704 and Table 80 on page 704.
Examples
This example displays the 10 most resent event messages in the buffered
log. The messages are displayed from oldest to newest:
awplus# show log tail
This example displays the 30 most recent event messages:
awplus# show log tail 30