Allied Telesis AT-8100 Series - Manual (Page 386)

Chapter 20: MAC Address Table Commands
386
CLEAR MAC ADDRESS-TABLE
Syntax
clear mac address-table dynamic|static [address
macaddress ]|[interface port ]|[vlan vid ]
Parameters
dynamic
Deletes dynamic MAC addresses.
static
Deletes static addresses.
address
Deletes a specific address.
macaddress
Specifies the address to be deleted. The address must be
specified in either one of the following formats: xx:xx:xx:xx:xx:xx or
xxxx.xxxx.xxxx
interface
Deletes MAC addresses learned on a specific port.
port
Specifies the port the MAC addresses to be deleted was learned
on. You can specify more than one port.
vlan
Deletes MAC addresses learned on a specific VLAN.
vid
Specifies the VID of the VLAN the MAC addresses to be deleted
was learned on. You can specify just one VID.
Mode
Privileged Exec mode
Description
Use this command to delete addresses from the MAC address table.
Confirmation Command
“SHOW MAC ADDRESS-TABLE” on page 394.