Allied Telesis AT-8100 Series - Manual (Page 470)

Chapter 27: Port Mirror
470
awplus(config)# interface port1.0.14,port1.0.15 Enter the Port Interface modes for
ports 14 and 15.
awplus(config-if)# access-group 3008 Assign the access control list to
the ports.
awplus(config-if)# end Return to the Privileged Exec
mode.
awplus# show mirror Use the SHOW MIRROR
command to confirm that port 18 is
the destination port of the port
mirror.
awplus# show access-list Use the SHOW ACCESS-LIST
command to confirm the
configuration of the access control
list.
awplus# show interface port1.0.14,port1.0.15
access-group Use the SHOW INTERFACE
ACCESS-GROUP command to
confirm that the access control list
is assigned to ports 14 and 15.
Mirror-To-Port Name: Port1.0.18
Hardware IP access-list 3008
copy-to-mirror ip any 149.83.124.95 mask 255.255.255.255
Total number of access-list = 1
Interface port1.0.14
access-group 3008
Interface port1.0.15
access-group 3008