Ip dhcp snooping subscriber-id – Allied Telesis AT-8100 Series User Manual
Page 657
AT-8100 Switch Command Line User’s Guide
657
IP DHCP SNOOPING SUBSCRIBER-ID
Syntax
ip dhcp snooping subscriber-id <
sub-id
>
Parameters
sub-id
Specifies a subscriber ID in an alphanumeric (ASCII) string of 1 to
50 characters. Spaces are permitted; however, they must be
enclosed in double quotation marks. Wild cards are not permitted.
Mode
Port Interface mode
Description
Use this command to assign a subscriber ID to a port. By default, no
subscriber IDs are assigned to any port on the switch.
The subscriber ID sub-option is included in the DHCP Option 82 field of
client DHCP packets that are forwarded from a port if all the following
conditions are met:
A subscriber ID is specified for the port using the IP DHCP
SNOOPING SUBSCRIBER-ID command.
DHCP Snooping Option 82 is enabled using “IP DHCP
SNOOPING AGENT-OPTION” on page 649. This command is
enabled by default.
DHCP Snooping is enabled on the switch with the SERVICE
DHCP SNOOPING command and on the VLAN to which the port
belongs using “IP DHCP SNOOPING” on page 648.
Use the no version of the command, NO IP DHCP SNOOPING
SUBSCRIBER-ID command, to remove the subscriber id assigned to a
port.
Confirmation Command