Allied Telesis AT-8100 Series - Manual (Page 681)

AT-8100 Switch Command Line User’s Guide
681
Table 77. SHOW IP DHCP SOURCE BINDING Command Parameters
Parameter Description
Client IP Address Specifies the IP address of the DHCP client.
MAC Address Specifies the MAC address of the DHCP
client.
VLAN Indicates the VLAN ID the packet is
received on.
Port Specifies Layer 2 port name the packet is
received on.
Expires (sec) Indicates the time, in seconds, until the
lease expires. The time is always infinite for
static bindings, or when the leave time in
the DHCP message is 0xfffffffff (infinite).
Type Indicates the DHCP snooping binding type
is static.