Allied Telesis AT-8100 Series - Manual (Page 533)

AT-8100 Switch Command Line User’s Guide
533
SHOW GROUP-LINK-CONTROL
Syntax
show group-link-control [ group_id ]
Parameters
group_id
Specifies a group ID number. The range is 1 through 8.
Mode
Privileged Exec mode
Description
Use this command to display the groups in group link control. Figure 114 is
an example of the information.
Figure 114. SHOW GROUP-LINK-CONTROL Command
The fields are defined in Table 53.
ID...........................................1
Status.......................................Up
Downstream (Link) Port(s)....................port1.0.22-port1.0.24
Upstream (Member) Port(s)....................port1.0.20-port1.0.22
ID...........................................2
Status.......................................Up
Downstream (Link) Port(s)....................port1.0.7
Upstream (Member) Port(s)....................port1.0.9
ID...........................................3
Status.......................................Down
Downstream (Link) Port(s)....................port1.0.11,port1.0.14
Upstream (Member) Port(s)....................port1.0.5
Table 53. SHOW GROUP-LINK-CONTROL Command
Field Definition
ID The group ID number.