Allied Telesis AT-8100 Series - Manual (Page 1732)

Chapter 101: QoS Commands
1732
MLS QOS AGGREGATE-POLICE TWIN-RATE
Syntax
mls qos aggregate-police twin-rate
action [drop-red|policed-dscp-transmit]
Parameters
Indicates the name of the police aggregator.
cir
Specifies the Committed Information Rate (CIR) of 1 to 16000000
Kbps.
cbs
Specifies the Committed Burst Size (CBS) of 0 to 16,777,216
bytes.
pir
Specifies the Peak Information Rate (PIR) of 0 to 160000000
Kbps.
pbs
Specifies the Peak Burst Size (PBS) of 0 to 16,777,216 bytes.
action
Specifies the action taken if the rate is exceeded (non-conforming
traffic). Choose from the following options:
drop-red: Drops the red packets.
policed-dscp-transmit: Modifies the packets using the policed
DSCP map and then sends the packets.
Mode
Global Configuration mode
Description
Use this command to configure a twin-rate aggregate policer. A policer
meters the traffic classified by the class map and, as a result, is given a
red bandwidth class for non-conforming traffic. If the sum of the number of
existing, or buffered, bytes plus those arriving at the port per unit time,
resulting in a value that exceeds the PBS value, this indicates non-
conforming traffic.