Allied Telesis AT-8100 Series - Manual (Page 60)

Chapter 1: AlliedWare Plus Command Line Interface
60
Note
By default, the mode prompts are prefixed with the “awplus” string.
To change this string, use the HOSTNAME command. See “What to
Configure First” on page 80.
Table 2. AlliedWare Plus Modes
Mode Prompt Function
User Exec mode awplus>  Displays the switch settings.
 Lists the files in the file system.
 Pings remote systems.
Privileged Exec mode awplus#  Displays the switch settings.
 Lists the files in the file system.
 Pings remote systems.
 Sets the date and time.
 Saves the current configuration.
 Downloads new versions of the
management software.
 Restores the default settings.
 Renames files in the file system.
 Resets the switch.
Global Configuration mode awplus (config)#  Creates classifiers and access
control lists.
 Creates encryption keys for remote
HTTPS and SSH management.
 Activates and deactivates 802.1x
port-based network access control.
 Assigns a name to the switch.
 Configures IGMP snooping.
 Sets the MAC address table aging
timer.
 Enters static MAC addresses.
 Specifies the IP address of an
SNTP server.
 Configures the RADIUS client.
 Sets the console timer.
Class-map mode awplus (config-cmap)#  Creates classifiers and flow groups
for Quality of Service policies.