Renegotiate – Allied Telesis AT-8100 Series User Manual

Page 230

Text mode
Original mode

Chapter 10: Port Parameter Commands

230

RENEGOTIATE

Syntax

renegotiate

Parameters

None

Mode

Port Interface mode

Description

Use this command to prompt a port that is set to Auto-Negotiation to
renegotiate its speed and duplex mode with its network device. You might
use this command if you believe that a port and a network device did not
establish the highest possible common settings during the Auto-
Negotiation process.

Example

This example prompts port 18 to renegotiate its settings with its network
counterpart:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.18
awplus(config-if)# renegotiate