Allied Telesis AT-8100 Series - Manual (Page 1051)

AT-8100 Switch Command Line User’s Guide
1051
Port Status The status of the port. The status can be
Enabled or Disabled. A port that has a
status of Enabled can forward network
traffic. A port that has a Disabled status
was shut down by the switch because it
has an intrusion action of shutdown, and it
received a packet with an unknown
source MAC address after learning its
maximum number of addresses. A port
can also have a status of Disabled if it
was manually disabled with the
SHUTDOWN command. To reactivate a
port with a Disabled status, use “NO
SHUTDOWN” on page 224.
Violation Mode The intrusion action of the port. The
actions are:
 Protect - Protect intrusion action
 Restrict - Restrict intrusion action
 Shutdown - Shut down intrusion action
Aging The status of MAC address aging on the
port. If the aging status is No, the MAC
addresses that are learned on the port are
added as static MAC addresses to the
MAC address table, so that they are
retained even when the source nodes are
inactive. If the aging status is Yes, the
MAC addresses that are learned on the
port are stored as dynamic MAC
addresses and are deleted when the
source nodes are inactive.
To configure the port to save the source
MAC addresses as static addresses, refer
to “NO SWITCHPORT PORT-SECURITY
AGING” on page 1049. To configure the
port to save the source MAC addresses
as dynamic addresses, refer to
“SWITCHPORT PORT-SECURITY
AGING” on page 1056.
Table 111. SHOW PORT-SECURITY INTERFACE Command (Continued)
Field Description