Allied Telesis AT-8100 Series - Manual (Page 1047)

1047
Chapter 70
MAC Address-based Port Security
Commands
The MAC address-based port security commands are summarized in
Table 110 and described in detail within the chapter.
Table 110. MAC Address-based Port Security Commands
Command Mode Description
“NO SWITCHPORT PORT-
SECURITY” on page 1048 Port Interface Removes MAC address-based
security from ports.
“NO SWITCHPORT PORT-
SECURITY AGING” on page 1049 Port Interface Configures ports to add the source
MAC addresses as static MAC
address in the MAC address table.
“SHOW PORT-SECURITY
INTERFACE” on page 1050 Privileged Exec Displays the security mode settings of
the ports
“SHOW PORT-SECURITY
INTRUSION INTERFACE” on
page 1053 Privileged Exec Displays the number of packets the
ports have discarded.
“SWITCHPORT PORT-SECURITY”
on page 1055 Port Interface Activates MAC address-based
security on ports.
“SWITCHPORT PORT-SECURITY
AGING” on page 1056 Port Interface Configures ports to add the source
MAC addresses as dynamic MAC
address in the MAC address table.
“SWITCHPORT PORT-SECURITY
MAXIMUM” on page 1057 Port Interface Specifies the maximum number of
dynamic MAC addresses that ports
can learn.
“SWITCHPORT PORT-SECURITY
VIOLATION” on page 1058 Port Interface Specifies the intrusion actions of the
ports.