Allied Telesis AT-8100 Series - Manual (Page 1158)

Chapter 74: SNMPv1 and SNMPv2c Commands
1158
NO SNMP-SERVER COMMUNITY
Syntax
no snmp-server community community
Parameter
community
Specifies an SNMP community string to be deleted from the
switch. This parameter is case sensitive.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv1 and SNMPv2c community strings
from the switch. Deleting community strings with this command also
deletes any IP addresses of SNMP trap or inform receivers assigned to
the community strings. You can delete only one community string at a time
with this command.
Confirmation Command
“SHOW SNMP-SERVER COMMUNITY” on page 1167
Example
This example deletes the “pla178ta” community string from the switch, as
well as any IP addresses of trap or inform receivers that are assigned to it:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server community pla178ta