Allied Telesis AT-8100 Series - Manual (Page 1053)

AT-8100 Switch Command Line User’s Guide
1053
SHOW PORT-SECURITY INTRUSION INTERFACE
Syntax
show port-security intrusion interface port
Parameter
port
Specifies a port. You can specify more than one port at a time.
Modes
Privileged Exec mode
Description
Use this command to display the number of packets the ports have had to
discard because the packets had unknown source MAC addresses. The
ports begin to discard packets after learning their maximum number of
source MAC addresses. This information is also available with “SHOW
PORT-SECURITY INTERFACE” on page 1050.
Figure 187 provides an example of the information.
Figure 187. SHOW PORT-SECURITY INTRUSION INTERFACE
Command
Example
This command displays the number of discarded packets on port 15:
awplus# show port-security intrusion interface port1.0.15
Figure 188 on page 1054 is an example of the information.
Port Security Intrusion List
--------------------------------------------------------
Interface: Port 1.0.4
- 122 intrusion(s) detected