Allied Telesis AT-8100 Series - Manual (Page 1184)

Chapter 75: SNMPv3 Commands
1184
NO SNMP-SERVER HOST
Syntax
no snmp-server host ipaddress informs|traps v3
auth|noauth|priv username
Parameters
ipaddress
Specifies the IP address of a trap receiver. The address can be
IPv4 or IPv6. You can specify just one address.
informs/trap
Specifies the type of message the switch sends. The options are:
informs: Sends inform messages.
trap: Sends trap messages.
noauth/auth/priv
Specifies the minimum security level of the user associated with
this entry. The options are:
noauth: Indicates no authentication or privacy.
auth: Indicates authentication, but no privacy.
priv: Indicates authentication and privacy.
username
Specifies an SNMPv3 user name.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv3 host entries. Host entries define the
IP addresses to receive SNMPv3 inform and trap messages.