Allied Telesis AT-8100 Series - Manual (Page 1093)

AT-8100 Switch Command Line User’s Guide
1093
“DOT1X SUPPLICANT-PARAMS
MAX-START” on page 1120 Port Interface Specifies the maximum number of
times a supplicant sends EAPOL-Start
frames before assuming that there is
no authenticator present.
“DOT1X SUPPLICANT-PARAMS
PASSWORD” on page 1121 Port Interface Assigns a password to a supplicant
port.
“DOT1X SUPPLICANT-PARAMS
USERNAME” on page 1122 Port Interface Assigns a username to a supplicant
port.
“DOT1X TIMEOUT TX-PERIOD” on
page 1123 Port Interface Sets the amount of time the switch
waits for a reply from a supplicant to
an EAP-request/identity frame.
“NO AAA AUTHENTICATION DOT1X
DEFAULT GROUP RADIUS” on
page 1124 Global
Configuration Disables 802.1x port-based network
access control on the switch.
“NO AUTH DYNAMIC-VLAN-
CREATION” on page 1125 Port Interface Disables dynamic VLAN assignments
of authenticator ports.
“NO AUTH GUEST-VLAN” on
page 1126 Port Interface Disables the Guest VLAN feature on
an authenticator port.
“NO AUTH REAUTHENTICATION” on
page 1127 Port Interface Removes reauthentication from
authenticator ports.
“NO AUTH-MAC ENABLE” on
page 1128 Port Interface Deactivates MAC address-based
authentication on authenticator ports.
“NO DOT1X PORT-CONTROL” on
page 1129 Port Interface Removes ports from the authenticator
role.
“NO DOT1X PORT-CONTROL
SUPPLICANT” on page 1130 Port Interface Removes ports from the supplicant
role.
“SHOW AUTH-MAC INTERFACE” on
page 1131 Privileged Exec Displays the parameter settings of
authenticator ports.
“SHOW AUTH-MAC
SESSIONSTATISTICS INTERFACE”
on page 1132 Privileged Exec Displays the session status of the
authenticator ports.
“SHOW AUTH-MAC STATISTICS
INTERFACE” on page 1133 Privileged Exec Displays the authentication statistics
of authenticator ports.
“SHOW AUTH-MAC SUPPLICANT
INTERFACE” on page 1134 Privileged Exec Displays the supplicant state on
authenticator ports.
Table 115. 802.1x Port-based Network Access Control Commands (Continued)
Command Mode Description