beautypg.com

No switchport block egress-multicast – Allied Telesis AT-8100 Series User Manual

Page 536

background image

Chapter 33: Multicast Commands

536

NO SWITCHPORT BLOCK EGRESS-MULTICAST

Syntax

no switchport block egress-multicast

Parameters

None

Mode

Port Interface mode

Description

Use this command to resume forwarding of egress multicast packets on
ports. By default, this is the default setting on all of the ports on the switch.

Confirmation Command

“SHOW INTERFACE” on page 234

Example

This example resumes forwarding of egress multicast packets on port 19:

awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.19
awplus(config-if)# no switchport block egress-multicast