Allied Telesis AT-8100 Series User Manual

Page 1359

AT-8100 Switch Command Line User’s Guide

1359

Confirmation Command

Example

This example creates an RMON alarm that monitors ingress multicast
packets (OID 1.3.6.1.2.1.16.1.1.1.7) on a port assigned a statistics group
with the ID number 5. The alarm triggers event ID number 1 if the number
of multicast packets exceeds 10,000 packets per minute or falls below
1,000 packets:

awplus> enable
awplus# configure terminal
awplus(config)# rmon alarm 1 1.3.6.1.2.1.16.1.1.1.7.5
interval 60 delta rising-threshold 10000 event 1 falling-
threshold 1000 event 1

Note

For examples that illustrate how to create all of the components of
RMON alarms, refer to “RMON Alarms” on page 1342.

etherStatsMulticastPkts

1.3.6.1.2.1.16.1.1.1.7.stats_id

etherStatsCRCAlignErrors

1.3.6.1.2.1.16.1.1.1.8.stats_id

etherStatsUndersizePkts

1.3.6.1.2.1.16.1.1.1.9.stats_id

etherStatsOversizePkts

1.3.6.1.2.1.16.1.1.1.10.stats_id

etherStatsFragments

1.3.6.1.2.1.16.1.1.1.11.stats_id

etherStatsJabbers

1.3.6.1.2.1.16.1.1.1.12.stats_id

etherStatsCollisions

1.3.6.1.2.1.16.1.1.1.13.stats_id

etherStatsPkts64Octets

1.3.6.1.2.1.16.1.1.1.14.stats_id

etherStatsPkts65to127Octets

1.3.6.1.2.1.16.1.1.1.15.stats_id

etherStatsPkts128to255Octets

1.3.6.1.2.1.16.1.1.1.16.stats_id

etherStatsPkts256to511Octets

1.3.6.1.2.1.16.1.1.1.17.stats_id

etherStatsPkts512to1023Octets

1.3.6.1.2.1.16.1.1.1.18.stats_id

etherStatsPkts1024to1518Octets

1.3.6.1.2.1.16.1.1.1.19.stats_id

Table 143. MIB Object Names and ID Numbers (Continued)

MIB Name

OID Number