beautypg.com

Storm-control – Allied Telesis AT-8100 Series User Manual

Page 254

background image

Chapter 10: Port Parameter Commands

254

STORM-CONTROL

Syntax

storm-control broadcast|multicast|dlf level

value

Parameters

broadcast

Specifies broadcast packets.

multicast

Specifies multicast packets.

dlf

Specifies unknown unicast packets.

level

Specifies the maximum number of ingress packets per second of
the designated type the port will forward. The range is 0 to
33,554,431 packets.

Mode

Port Interface mode

Description

Use this command to set maximum thresholds for the ingress packets on
the ports. Ingress packets that exceed the thresholds are discarded by the
ports. Thresholds can be set independently for broadcast packets,
multicast packets, and unknown unicast packets. To view the current
thresholds of the ports, refer to “SHOW RUNNING-CONFIG” on
page 170.

To remove threshold levels from the ports, refer to “NO STORM-
CONTROL” on page 226.

Confirmation Commands

“SHOW STORM-CONTROL” on page 246

“SHOW RUNNING-CONFIG” on page 170