Allied Telesis AT-8100 Series - Manual (Page 1849)

AT-8100 Switch Command Line User’s Guide
1849
SHOW IP ROUTE
Syntax
show ip route
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the routes on the switch. Figure 283 displays
an example of the information.
Figure 283. SHOW IP ROUTE Command
The field “Gateway of last resort is” states the default gateway, which, if
defined on the switch, is also included as the first entry in the table.
The possible codes in the left column in the table are described in Table
255.
Codes: C - connected, S - static, R - RIP
* - candidate default
Gateway of last resort is 149.101.23.28 to network 0.0.0.0.
S* 0.0.0.0/0 [1/0] via 149.101.23.28, vlan28
R 149.101.152.0/24 [120/2] via 149.101.23.28, vlan15, 00:05:27
R 149.101.201.0/24 [120/2] via 149.101.54.109, vlan23, 01:38:09
S 149.101.32.0/24 [1/0] via 149.101.23.28, vlan15
S 149.101.33.0/24 [1/0] via 149.101.23.28, vlan15
S 149.101.42.0/24 [1/0] via 149.101.54.109, vlan23
C 149.101.23.0/24 is directly connected, vlan15
C 149.101.54.0/24 is directly connected, vlan23
Table 255. Route Codes in the SHOW IP ROUTE Command
Code Description
S* Default gateway.
R Route to a remote network learned by RIP.