beautypg.com

Allied Telesis AT-8100 Series User Manual

Page 1620

background image

Chapter 99: ACL Commands

1620

This example creates an IP ACL, called “ipdeny2,” that denies IP packets
from IPv6 source address fe80::202:b3ff:fele:8329/64 to IPv6 destination
address fe80::202:b3ff:fele:8330/64 on VLAN 3. Then the ACL is assigned
to port 3:

awplus> enable
awplus# configure terminal
awplus(config)# ipv6 access-list ipdeny2
awplus(config-ipv6-acl)# deny ip fe80::202:b3ff:fele:8329/
64 fe80::202:b3ff:fele:8329/64 vlan 3
awplus(config-ipv6-acl)# exit
awplus(config)# interface port1.0.3
awplus(config_if)# ipv6 traffic-filter ipdeny2