Allied Telesis AT-8100 Series - Manual (Page 1689)

AT-8100 Switch Command Line User’s Guide
1689
awplus (config-pmap)# class
trustdscp Enters the “trustdscp” class map.
awplus (config-pmap-c)# trust dscp Enables the “trustdscp” class map to trust
DSCP ingress packets for prioritization.
awplus (config-if)# wrr-queue weight
3,3,1,1,12,0,0,0 Assigns a weight to the eight default DSCP
queues where weight specifies the number of
packets a port transmits from a queue before
going to the next queue. By default, the DSCP
queues start with queue 0. DSCP queues 0 and
1 are assigned a weight of 3. DSCP queues 2
and 3 are assigned a weight of 1. DSCP queue
4 is assigned a weight of 12. DSCP queues 5
through 7 are assigned a weight of 0.
awplus (config-if)# service-policy
input AutoQoS Associates policy map “AutoQoS” with the given
port.
Table 231. Auto-QoS MED with Trust DSCP Functionality Example (Continued)
Command Description