Allied Telesis AT-8100 Series - Manual (Page 1434)

Chapter 91: SSH Server Commands
1434
NO SERVICE SSH
Syntax
no service ssh
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable the Secure Shell server to prevent remote
management of the switch using a Secure Shell client. The default setting
for the Secure Shell server is disabled.
Note
Your management session of the switch ends if you disable the
server from a remote SSH management session. To resume
managing the switch from a local management session or a remote
Telnet or web browser session, you must wait for the console timer
to expire if the switch is configured to support one manager session
at a time. The default setting for the console timer is 10 minutes.
Confirmation Command
“SHOW SSH SERVER” on page 1437
Example
This example disables the Secure Shell server:
awplus> enable
awplus# configure terminal
awplus(config)# no service ssh