beautypg.com

Show ipv6 route, Show ipv6 route command – Allied Telesis AT-8100 Series User Manual

Page 336

background image

Chapter 14: IPv4 and IPv6 Management Address Commands

336

SHOW IPV6 ROUTE

Syntax

show ipv6 route

Parameters

None

Mode

Privileged Exec mode

Description

Use this command to display the IPv6 management address and default
gateway on the switch. Figure 76 is an example of the information. The
default route is display first, followed by the management address.

Figure 76. SHOW IPV6 ROUTE Command

Example

The following example displays the IPv6 management address and
default gateway:

awplus# show ipv6 route

IPv6 Routing Table
Codes: C - connected, S - static

S 0:0:0:0:0:0:0:0/0 via 832a:5821:b34a:0:0:0:187:14, vlan4-0

C 832a:5821:b34a:0:0:0:187:95a/64 via ::, vlan4-0

See also other documents in the category Allied Telesis Computer hardware: