Allied Telesis AT-8100 Series - Manual (Page 640)

Chapter 44: DHCP Snooping Commands
640
“IP DHCP SNOOPING MAX-
BINDINGS” on page 655 Port Interface
mode Sets the maximum number of DHCP
lease entries that can be stored in the
DHCP snooping database for each
port.
“IP DHCP SNOOPING
SUBSCRIBER-ID” on page 657 Port Interface
mode Sets a subscriber ID for a port.
“IP DHCP SNOOPING TRUST” on
page 659 Port Interface
mode Sets ports to be DHCP snooping
trusted ports.
“IP DHCP VERIFY MAC-ADDRESS”
on page 660 Global
Configuration
mode Verifies that the source MAC address
and client hardware address match in
DHCP packets received on untrusted
ports.
“IP DHCP SNOOPING VIOLATION”
on page 662 Port Interface
mode Specifies the action the switch takes
when it detects a DHCP snooping
violation.
“IP SOURCE BINDING” on page 664 Global
Configuration
mode Adds or replaces a static entry in the
DHCP snooping database.
“SERVICE DHCP SNOOPING” on
page 666 Global
Configuration
mode Enables the DHCP snooping service
on the switch globally.
“SHOW ARP SECURITY” on
page 668 Privilege Exec
mode Displays security configuration on the
switch.
“SHOW ARP SECURITY
INTERFACE” on page 670 Privilege Exec
mode Displays ARP security configuration
for the ports specified.
“SHOW ARP SECURITY
STATISTICS” on page 672 Privilege Exec
mode Displays the ARP security statistics for
the specified ports.
“SHOW IP DHCP SNOOPING” on
page 674 Privilege Exec
mode Displays the global DHCP snooping
configuration on the switch.
“SHOW IP DHCP SNOOPING
BINDING” on page 676 Privilege Exec
mode Displays all dynamic and static entries
in the DHCP snooping binding
database.
“SHOW IP DHCP SNOOPING
INTERFACE” on page 678 Privilege Exec
mode Displays DHCP snooping information
for a port or a list of ports.
“SHOW IP SOURCE BINDING” on
page 680 Privilege Exec
mode Displays static entries in the DHCP
snooping database.
Table 71. DHCP Commands (Continued)
Command Mode Description