beautypg.com

Allied Telesis AT-8100 Series User Manual

Page 1790

background image

Chapter 102: QoS Storm Control Protection

1790

When the software detects a storm on a port, a message is automatically
recorded in the Event log or Syslog. In addition, you can configure a
Linkdown trap to signal that a port has been disabled with the SNMP
TRAP LINK-STATUS command. See “SNMP TRAP LINK-STATUS” on
page 1178.

Sets the frequency (in milliseconds)
that traffic is measured to determine if
storm protection is activated.

storm-window

<100 - 6000>

Displays the QSP status for the
specified port.

show mls qos interface

port storm-

status

Table 242. Policy-Based QSP Commands (Continued)

To do this Task

Use this Command