Allied Telesis AT-8100 Series - Manual (Page 1112)

Chapter 72: 802.1x Port-based Network Access Control Commands
1112
DOT1X INITIALIZE INTERFACE
Syntax
dot1x initialize interface port
Parameters
port
Specifies a port. You can enter more than one port.
Mode
Privileged Exec mode
Description
Use this command to force authenticator ports into the unauthorized state.
You might use this command to force supplicants on authenticator ports to
reauthenticate themselves again by logging in with their usernames and
passwords.
Example
This example forces authenticator ports 1.0.16 and 1.0.22 into the
unauthorized state so that the supplicants must log on again:
awplus> enable
awplus# dot1x initialize interface port1.0.16,port1.0.22