Allied Telesis AT-8100 Series - Manual (Page 432)

Chapter 23: Enhanced Stacking
432
awplus# show estack remotelist Reconfirm the enhanced stacking
ID number of the replacement
member switch.
awplus# configure terminal Enter the Global Configuration
mode.
awplus(config)# rcommand 3 Use the RCOMMAND command
to start a remote management
session on the replacement
member switch. In this example
the ID number of the switch is 3.
Login: manager
Password: ****** Log on the replacement member
switch.
awplus> enable Enter the Privileged Exec mode.
awplus(config)# move boot.cfg actSalesE4.cfg Rename the boot.cfg configuration
file to actSalesE4.cfg.
awplus(config)# boot config-file actSalesE4.cfg Designate the actSalesE4 file as
the active boot configuration file
on the switch.
awplus(config)# exit Return to the Privileged Exec
mode.
awplus# exit End your management session of
the replacement member switch to
return the session to the command
switch.
awplus(config)# reboot estack member 3 From the command switch, reboot
the replacement member switch
so that it configures its parameters
with the actSalesE4.cfg
configuration file.