Grass Valley Xstudio Vertigo Suite v.4.10 User Manual
Page 394
Xstudio User Manual
15-41
Appendix C - Xstudio properties
Name
[Name]
•
Applies to: Scene-side
•
Description: The name that is used to identify the group object on the
scene and in the Scene Tree.
The default name given to group objects is usually Group followed by an
incrementing number (i.e. Group1, Group2). To edit or rename the group
object’s name, simply type the new name in this properties text box.
•
Accepted values: To edit or rename the group object’s name, simply type
the new name (text) in this property’s text box.
Opacity
[Opacity]
•
Applies to: Scene-side
•
Description: Sets the degree of opacity for the object. Note that the
effects of setting the opacity property are only displayed on the output
device.
•
Accepted values: Specify a value between 0.0 (transparent) and 1.0
(opaque).
RotateX
[RotateX]
•
Applies to: Scene-side
•
Description: Sets the group object’s rotation angle/direction around the
horizontal axis.
•
Accepted values: The Rotate X property value is set in units of angular
degrees, referenced from the point of origin (0.0) up to 360 degrees
which provides a full rotation around the X axis. Entering a positive value
rotates the object from front-to-back, while negative values rotate the
object back-to-front.
RotateY
[RotateY]
•
Applies to: Scene-side
•
Description: Sets the group object’s rotation angle/direction around the
vertical axis.
•
Accepted values: The Rotate Y property value is set in units of angular
degrees, referenced from the point of origin (0.0) up to 360 degrees
which provides a full rotation around the Y axis. Entering a positive value
rotates the object from right-to-left, while negative values rotate the
object left-to-right.
RotateZ
[RotateZ]
•
Applies to: Scene-side
•
Description: Sets the group object’s rotation angle/direction around the
z axis.
•
Accepted values: The Rotate Z property value is set in units of angular
degrees, referenced from the point of origin (0.0) up to 360 degrees
which provides a full rotation around the Z axis. Entering a positive value
rotates the object counter-clockwise, while negative values rotate the
object clockwise.
Group Properties
Description