Grass Valley Xstudio Vertigo Suite v.4.10 - Manual (Page 207)

8-2 Xstudio User Manual
Working with control objects
Connecting control objects to scene objects
When a template or control panel is associated with a scene, it is usually because objects
on the project’s scene-side are to be controlled by elements on the control-side. For
example, figure
8-1 demonstrates that a text box on the control side can dictate the text that
will be displayed as text in the scene. For this relationship and behavior to occur, you must
connect the control element with the scene element.
Figure 8-1. Making the connection between the objects on the control-side and the scene
To connect a control object to a scene object:
1.
Display the S CENE T REE and then display the control-side of the project by selecting the
Template or Panel tab.
2. Drag the scene object from the S CENE T REE and drop it onto its corresponding object
on the control-side tab.
Figure 8-2. Connecting a control object to a scene object
3. Display the P ROPERTY B ROWSER (CTRL + R).
N
OTE
You could also forego the first two steps of the procedure by simply entering the scene
name in the S
CENE E LEMENT row of the P ROPERTY B ROWSER (press CTRL + P to display it).