Grass Valley Xstudio Vertigo Suite v.4.10 - Manual (Page 22)

Xstudio User Manual 2-3
Getting started with Xstudio
Starting Xstudio and connecting to the Xmedia Server
When you initially launch Xstudio, a dialog box appears and asks you to configure the
server location. As a client application, Xstudio must be connected to the Xmedia Server,
which is the centralized asset management server for Vertigo applications and devices.
Since you have only just installed Xstudio, the first task that you must do is to connect
Xstudio to the Xmedia Server.
To start Xstudio and connect to the Xmedia Server:
1.
Click S TART >P ROGRAMS >V ERTIGO X MEDIA >X STUDIO .
2. When the message asking you to configure the server location, click the Y ES button.
The S ETTINGS dialog box appears.
Figure 2-1. Settings dialog box
3. Click S ERVERS in the tree view at left. This displays the settings related to the Xmedia
Server (see page 2-5 for more information about Xstudio’s Server settings).
4. In the X MEDIA S ERVER IP A DDRESS field, replace with the IP address of
the machine hosting the Xmedia Server.
5. Unless the port number was changed when the Xmedia Server was installed, the
default in the X
MEDIA S ERVER P ORT field will be correct. If it was changed, enter the new
number.
6. Click OK.
Xstudio launches. If the program does not launch, consult your system administrator.
The problem could be due to one of the following:
• The IP address or port was entered incorrectly.
• The machine hosting the Xmedia Server is down.
• The XmediaServer is not running on the host machine.
• The machine is not connected to the network.