Grass Valley Xstudio Vertigo Suite v.4.10 - Manual (Page 34)

Xstudio User Manual 2-15
Getting started with Xstudio
6. Click A PPLY .
7. In the D EVICE C ONFIGURATION dialog box, select the output device from the table at left
and then click . The device appears in the A CTIVE D EVICE box at right.
8. Click OK.
The output device name appears in the upper right-hand portion of the main Xstudio
window. When connected, the LED beside it is green and when disconnected, it is red.
Figure 2-11. Connectivity indicator
N OTE
If Xstudio disconnects from the output device (red LED), you can reconnect to it without
having to access the D
EVICE C ONFIGURATION dialog box.
Simply select Xstudio’s T OOLS >D EVICES >R ECONNECT A CTIVE D EVICE menu command, or
double-click the LED in the upper right-hand portion of the main Xstudio window.
External Keyer Allows you to associate another device with the current device. This
setting is specifically used when the CG output is keyed over the
ImageStore output. In this way, specific commands can be sent to
the ImageStore (the External keyer) when specific things are done
on the CG.
Publish Master Lets you select a master device.