Grass Valley Xstudio Vertigo Suite v.4.10 - Manual (Page 32)

Xstudio User Manual 2-13
Getting started with Xstudio
4. Specify the appropriate General Device Configuration settings:
General tab
Device name The name of the selected output device. This can only be modified
when adding a device.
Device alias An alternative name for the selected device on your network.
Description An optional field that lets you label the device to distinguish it from
other similar devices at your facility (for example).
Device Type Identifies the type of device that these settings apply to. Choose
from: V
ERTIGO XG, I MAGE S TORE , I NTUITION , or O THER .
Control IP The network location (IP address) or hostname of the selected
output device. The host must be available on the network.
Warning: It is possible to use the localhost, but discouraged, since
the XmediaServer will have no way to locate the device for
publishing.
Control Port The networking port that serves as a channel for sending
commands to and from the output device.
Publish IP The network location (IP address) or hostname of the selected
output device. The host must be available on the network.
Warning: It is possible to use the localhost, but discouraged, since
the XmediaServer will have no way to locate the device for
publishing.
Publish Port The networking port that serves as a channel for publishing assets.
Typically, this value is set to 15000.
N OTE : This value must correspond with the port used by the
XpublishAgent on the output device.