Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 98)

88 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 18 Virtual Interfaces - Security tab
14. Use the Inbound IP Firewall Rules drop-down menu to select the firewall rule configuration to
apply to this Virtual Interface.
The firewall inspects and packet traffic to and from connected clients.
If a firewall rule does not exist suiting the data protection needs of this Virtual Interface, select the
Create icon to define a new firewall rule configuration or the Edit icon to modify an existing
configuration. For more information, see Wireless Firewall on page 8-531.
Use the VPN Crypto Map drop-down menu to select and assign a VPN crypto map entry to this
virtual interface. The VPN Crypto Map entry defines the type of VPN connection and its parameters.
For more information, see
Defining Profile VPN Settings .
15. Select the OK button located at the bottom right of the screen to save the changes to the
Security screen. Select Reset to revert to the last saved configuration.
Port Channel Configuration
Profile Interface Configuration
The access point’s profile can be applied to customize the port channel configurations as part of its
interface configuration.
To define a port channel configuration for an access point profile: