Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 854)

844 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
Graph
Wireless Client Statistics
Use the client Graph to assess a connected client’s radio performance and diagnose performance
issues that may be negatively impacting performance. Up to three selected performance variables
can be charted at one time. The graph uses a Y-axis and a X-axis to associate selected parameters
with their performance measure.
To view a graph of this client’s statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, an access point then a connected client.
3. Select Graph.
4. Use the Parameters drop down menu to define from 1- 3 variables assessing client signal
noise, transmit or receive values.
5. Use the Polling Interval drop-down menu to define the interval the chart is updated. Options
include 30 seconds, 1 minute, 5 minutes, 20 minutes or 1 hour. 30 seconds is the default
value.
FIGURE 100 Wireless Client - Graph
Select an available point in the graph to list the selected performance parameter, and display that
parameter’s value and a time stamp of when it occurred.