Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 621)

Brocade Mobility Access Point System Reference Guide 611
53-1003100-01
9
FIGURE 24 RADIUS Server Policy screen - LDAP tab
24. Refer to the following to determine whether an LDAP server can be used as is, a server
configuration requires creation or modification or a configuration requires deletion:
25. Select Add to add a new LDAP server configuration, Edit to modify an existing LDAP server
configuration or Delete to remove a LDAP server from the list of those available.
Redundancy Displays whether the listed LDAP server IP address has been defined as a
primary or secondary server resource. Designating at least one secondary server
is a good practice to ensure RADIUS user information is available if a primary
server were to become unavailable.
IP Address Displays the IP address of the external LDAP server acting as the data source for
the access point’s local RADIUS server.
Port Lists the physical port used by the RADIUS server to secure a connection with the
remote LDAP server resource.