Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 669)

Brocade Mobility Access Point System Reference Guide 659
53-1003100-01
12
FIGURE 24 AP Upgrade screen - AP Image File
2. Select the Device Image File tab and refer to the following configuration parameters:
Device Image Type Select the access point model to specify which model should be available to
upgrade. Upgrades can only be made to the same access point model. For
example, a different firmware image cannot be used to upgrade an Brocade
Mobility 7131 Access Point model access point. For that reason, the drop-down
menu will only display the model deployed.
URL Enter a URL pointing to the location of the image file.
Advanced/Basic Select Advanced to list additional options for the image file location including
protocol, host and path. Additional options display based on the selected protocol.
Select Basic to display only the URL field.