Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 661)

Brocade Mobility Access Point System Reference Guide 651
53-1003100-01
12
1. Select the target device from the left-hand side of the UI.
FIGURE 15 Device Browser
Select the down arrow next to the device to view a set of operations that can be performed on the
selected device.
FIGURE 16 Device Browser - Options for a device
To locate the device, click the Flash LEDs item. The following windows displays:
FIGURE 17 Device Pane - Locator screen
Use the spinner to set a value for Flash LED Duration. This is the duration, in minutes, the device
will flash its LEDs. Once this duration expires, the LEDs starts operating normally.
Click Locator ON to start flashing the LEDs. Click Locator OFF to stop the LEDs from flashing and
resume normal operation. Click Close to close this window.