Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 245)

Brocade Mobility Access Point System Reference Guide 235
53-1003100-01
5
FIGURE 117 Certificate Management - Generate RSA Key screen
Define the following configuration parameters required to generate a key:
Select OK to generate the RSA key. Select Cancel to revert the screen to its last saved
configuration.
To optionally import a CA certificate, select the Import button from the RSA Keys screen.
FIGURE 118 Certificate Management - Import New RSA Key screen
Key Name Enter the 32 character maximum name assigned to the RSA key.
Key Size Use the spinner control to set the size of the key (from 1,024 - 2,048 bits). Brocade recommends
leaving this value at the default setting of 1024 to ensure optimum functionality.