Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 710)

700 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
The Adopted Devices screen provides the following:
Pending Adoptions
System Statistics
The Pending Devices screen displays those devices detected within the network coverage area, but
have yet to be adopted. Review these devices to assess whether they could provide radio coverage
to wireless clients needing support.
To view pending AP adoptions to the controller or service platform:
1. Select the Statistics menu from the Web UI.
2. Select the System node from the left navigation pane.
3. Select Pending Adoptions from the left-hand side of the UI.
Adopted Device Displays administrator assigned hostname of the adopted device. Select the
adopted device to display configuration and network address information in greater
detail.
Type Displays the adopted access point’s model type.
RF Domain Name Displays the domain the adopted AP has been assigned to. Select the RF Domain to
display configuration and network address information in greater detail.
Model Number Lists the model number of each AP that’s been adopted since this screen was last
refreshed.
Config Status Displays the configuration file version in use by each listed adopted device. Use this
information to determine whether an upgrade would increase the functionality of the
adopted device.
Config Errors Lists any errors encountered when the listed device was adopted.
Adopter Hostname Lists the administrator hostname assigned to the adopting controller or service
platform.
Adoption Time Displays a timestamp for each listed device that reflects when the device was
adopted by the controller or service platform.
Startup Time Provides a date stamp when the adopted device was restarted post adoption.
Refresh Select Refresh to update the statistics counters to their latest values.