Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 353)

Brocade Mobility Access Point System Reference Guide 343
53-1003100-01
5
Refer to the General field to assign or override the following:
Select OK to save the changes or overrides. Select Reset to revert to the last saved configuration.
Overriding a Certificate Revocation List (CRL) Configuration
Overriding a Security Configuration
A certificate revocation list (CRL) is a list of certificates that have been revoked or are no longer
valid. A certificate can be revoked if the certificate authority (CA) had improperly issued a
certificate, or if a private-key is compromised. The most common reason for revocation is the user
no longer being in sole possession of the private key.
To define a Certificate Revocation configuration or override:
Select Devices from the Configuration tab.
Select Device Overrides from the Device menu to expand it into sub menu options.
Select a target device from the device browser in the lower, left-hand, side of the UI.
Select Security to expand its sub menu options.
Select Certificate Revocation.
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear
Overrides. This will remove all overrides from the device.
Firewall Policy Select the firewall policy used by devices with this profile. Use the icons next to this field to create
or add new firewall policies.
Wireless Client Role Policy Select the Wireless Client Role Policy used by devices with this profile. Use the icons next to this
field to create or add new role policies.
WEP Shared Key
Authentication Select this option to require devices using this profile to use a WEP key to access the network
using this profile. Clients without Motorola Solutions adapters need to use WEP keys manually
configured as hexadecimal numbers. This option is disabled by default.