Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 153)

Brocade Mobility Access Point System Reference Guide 143
53-1003100-01
5
FIGURE 51 Network - Bridge VLAN - IGMP Snooping screen
Define the following IGMP General parameters.
Define the following Multicast Router settings:
Enable IGMP Snooping Select this option to enable IGMP snooping. If disabled, snooping on this bridge VLAN is disabled.
This feature is enabled by default. If disabled, the settings under bridge configuration are
overridden.
Forward Unknown Multicast
Packets Select this option to enable forwarding of multicast packets from unregistered multicast groups.
If disabled, the unknown multicast forward feature is also disabled for this bridge VLAN. This
settings is enabled by default.
Interface Names Select the interface used for IGMP snooping over a multicast router. Multiple interfaces can be
selected.
Multicast Router Learn
Mode Select static or pim-dvmrp as the mode used to determine client multicast traffic levels on
specific routes.