Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 48)

38 Brocade Mobility Access Point System Reference Guide
53-1003100-01
3
FIGURE 18 Initial Setup Wizard - WAN Configuration screen for Advanced Setup Wizard
Set the following WLAN1 Configuration parameters:
• SSID – Configure the SSID for the WLAN.
• WLAN Type – Configure the encryption and authentication to use with this WLAN.
• No Authentication and No Encryption – Configures a network without any authentication.
This means any device can access the network. This option also configures the network
without encryption. This means any data transmitted through the network is in plain text.
• Captive Portal Authentication and No Encryption – Configures a network using a RADIUS
server to authenticate users before allowing them on to the network. Once on the network,
no encryption is used for the data transmitted through the network. Select this option to
use a Web page (either internally or externally hosted) to authenticate users before access
is granted to the network
• External RADIUS Server – When selected, provide the IP address of the external
RADIUS server used for user authentication. Also enter the shared secret in the
RADIUS Shared Secret field.