Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 761)

Brocade Mobility Access Point System Reference Guide 751
53-1003100-01
13
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select Health.
FIGURE 31 Access Point - Health screen
The Device Details field displays the following information:
Hostname Displays the AP’s unique name as assigned within the network. A hostname is assigned to a
device connected to a computer network.
Device MAC Displays the MAC address of the AP. This is factory assigned and cannot be changed.
Primary AP Displays the IP address of assigned to this device either through DHCP or through static IP
assignment.
Type Displays the access point’s model type.
Model Number Displays the access point’s model number to help further differentiate the access point from
others of the same model series and defined country of operation.
RF Domain Name Displays the access point’s RF Domain membership. Unlike a controller or service platform, an
access point can only belong to one RF Domain based on its model. The domain name appears
as a link that can be selected to show RF Domain utilization in greater detail.
Version Displays the access point’s current firmware version. Use this information to assess whether
an upgrade is required for better compatibility.
Uptime Displays the cumulative time since the access point was last rebooted or lost power.
CPU Displays the processor core.
RAM Displays the free memory available with the RAM.
System Clock Displays the system clock information.