Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 298)

288 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 146 Device Overrides - Network DNS screen
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear
Overrides. This will remove all overrides from the device.
Provide or override the default Domain Name used when resolving DNS names. The name cannot
exceed 64 characters.
Set or override the following Domain Name System (DNS) settings:
Provide a list of up to three DNS servers to forward DNS queries if DNS resources are unavailable.
The DNS name servers are used to resolve IP addresses. Use the Clear link next to each DNS
server to clear the DNS name server’s IP address from the list.
Select OK to save the changes and overrides made to the DNS configuration. Select Reset to revert
to the last saved configuration.
Overriding an ARP Configuration
Overriding the Network Configuration
Enable Domain Lookup Select this option to enable DNS on the access point. When enabled, human friendly domain
names can be converted into numerical IP destination addresses. The radio button is selected by
default.
Enable DNS Server
Forwarding Select this option to enable the forwarding DNS queries to external DNS servers if a DNS query
cannot be processed by the access point’s own DNS resources. This feature is disabled by default.