Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 282)

272 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
20. Select + Add Row as needed to include additional indexes.
21. Refer to the Spanning Tree Port Priority table.
Define an Instance Index using the spinner control and then set the Priority. The lower the priority, a
greater likelihood of the port becoming a designated port.
22. Select + Add Row needed to include additional indexes.
23. Select OK to save the changes made to the Ethernet Port Spanning Tree configuration. Select
Reset to revert to the last saved configuration.
Radio Override Configuration
Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no
longer relevant to the access point’s deployment objective.
To define a radio configuration override for an access point:
Select the Configuration tab from the Web UI.
Select Devices from the Configuration tab.
Select Device Overrides.
Select a target access point from the device browser in the lower, left-hand, side of the UI.
Select Interface to expand its sub menu options.
Select Radios.
<=10000000000 bits/sec 2000
<=100000000000 bits/sec 200
<=1000000000000 bits/sec 20
>1000000000000 bits/sec 2