Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 505)

Brocade Mobility Access Point System Reference Guide 495
53-1003100-01
7
FIGURE 3 Policy Based Routing screen - Add a Route Map
8. Use the spinner control to set a numeric precedence (priority) for this route-map. An incoming
packet is matched against the route-map with the highest precedence (lowest numerical
value).
9. Refer to the Match Clauses field to define the following matching criteria for the route-map
configuration:
DSCP Select this option to enable a spinner control to define the DSCP value used as matching criteria for
the route map.
DSCP is the Differentiated Services Code Point field in an IP header and is for packet classification.
Packets are filtered based on the traffic class defined in the IP DSCP field. One DSCP value can be
configured per route map entry.
Role Policy Use the drop-down to select a Role Policy to use with this route-map.
Click the Create icon to create a new Role Policy. To view and modify an existing policy, click the Edit
icon.