Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 549)

Brocade Mobility Access Point System Reference Guide 539
53-1003100-01
8
FIGURE 3 Wireless Firewall screen - Advanced Settings tab
12. Refer to the Firewall Status radio buttons to define the firewall as either Enabled or Disabled.
The firewall is enabled by default.
If disabling the firewall, a confirmation prompt displays stating NAT, wireless hotspot, proxy
ARP,
deny-static-wireless-client and deny-wireless-client sending not permitted traffic excessively
will be disabled.