Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 470)

460 Brocade Mobility Access Point System Reference Guide
53-1003100-01
6
FIGURE 29 Radio QoS Policy screen - Multimedia Optimizations tab
17. Set the following Accelerated Multicast settings:
Set the following Smart Aggregation settings.
Smart Aggregation enhances the existing implementation of frame aggregation by dynamically
selecting the time when the aggregated frame is transmitted. In the normal implementation of
frame aggregation, an aggregated frame is sent when it meets one of these conditions:
• When a preconfigured number of frames to aggregate is reached.
Maximum number of
wireless clients allowed Specify the maximum number of wireless clients (from 0 - 256) allowed to use accelerated
multicast. The default value is 25.
When wireless client count
exceeds the above limit When the wireless client count using accelerated multicast exceeds the maximum number set the
radio to either Reject new wireless clients or to Revert existing clients to a non-accelerated state.
The default setting is Reject.
Maximum multicast
streams per client Specify the maximum number of multicast streams (from 1 - 4) wireless clients can use. The default
value is 2.
Packets per second for
multicast flow for it to be
accelerated Specify the threshold of multicast packets per second (from 1 - 500) that triggers acceleration for
wireless clients. The default value is 25.
Timeout for wireless
clients Specify a timeout value in seconds (from 5 - 6,000) for wireless clients to revert back to a
non-accelerated state. The default value is 60.