Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 179)

Brocade Mobility Access Point System Reference Guide 169
53-1003100-01
5
30. Set the following IKEv1 or IKe v2 Settings:
31. Refer to the Wins Server Settings field and specify primary and secondary server resources for
validating RADIUS authentication requests on behalf of a remote VPN client. These external
WINS server resources are available to validate RADIUS resource requests.
32. Refer to the Name Server Settings field and specify primary and secondary server resources
for validating RADIUS authentication requests on behalf of a remote VPN client. These external
name server resources are available to validate RADIUS resource requests.
33. Select the IP Local Pool option to define an IP address and mask for a virtual IP pool used to IP
addresses to remote VPN clients.
34. If using IKEv2 specify following additional settings (required for IKEv2 only):
35. Select OK to save the updates made to the Remote VPN Server screen. Selecting Reset reverts
the screen to its last saved configuration.
Select the Remote VPN Client tab.
The Remote VPN Client screen provides options for configuring the remote VPN client.
Authentication Method Use the drop-down menu to specify the authentication method used to validate the credentials of
the remote VPN client. Options include Local (on board RADIUS resource if supported) and
RADIUS (designated external RADIUS resource). If selecting Local, select the + Add Row button
and specify a User Name and Password for authenticating remote VPN client connections with
the local RADIUS resource. The default setting is Local. Brocade Mobility 6511 Access Point do
not have a local RADIUS resource and must use an external RADIUS server resource.
AAA Policy Select the AAA policy used with the remote VPN client. AAA policies define RADIUS authentication
and accounting parameters. The access point can optionally use AAA server resources (when
using RADIUS as the authentication method) to provide user database information and user
authentication data.
DHCP Server Type Specify whether the Dynamic Host Configuration Protocol (DHCP) server is specified as an IP
address, Hostname (FQDN) or None (a different classification will be defined). DHCP allows hosts
on an IP network to request and be assigned IP addresses as well as discover information about
the network where they reside.
DHCP Server Depending on the DHCP server type selected, enter either the numerical IP address, hostname or
other (if None is selected as the server type).
IP Local Pool Select this option to define an IP address and mask for a virtual IP pool used to IP addresses to
remote VPN clients.
Relay Agent IP Address Select this option to define DHCP relay agent IP address.